Loading non running ZD28

[MikeHall]

I am going to pick up a lower hour non running zd28 mower in the morning. I will have to move it about 20ft then pull it up onto my trailer. How can you do this safely without damaging the hydro static motors or pump? I did a google search trying to find out if there is a hydraulic bypass for the motors but didnt see anything. Any advice would be great.

Thanks
Mike

 

[lugbolt]

There is no release.

Go slow. Like crawling slow. It'll let you know if you're going too fast by pushing back against you. The harder/faster you try to move it, the harder it works against you. Just go slow and it'll be fine.

 

[MilkyWay]

I am going to pick up a lower hour non running zd28 mower in the morning. I will have to move it about 20ft then pull it up onto my trailer. How can you do this safely without damaging the hydro static motors or pump? I did a google search trying to find out if there is a hydraulic bypass for the motors but didnt see anything. Any advice would be great.

Thanks
Mike

Hi Mike. Did you get it loaded? do you know what all is wrong with it. Keep us posted please.

 

[Firefighterontheside]

Put the rear tires or the whole machine on a piece of plywood and pull on the plywood like a sled.