I have a l2650 and a koyker 160 loader. I'm looking for direction on where to find mounts for them
Last edited:
Loader mounts
- Thread starter rbrown1970
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Ok I don't see a koyker 650 loader.
If it's anything like a 645 it's WAY WAY WAY too big for a l2650.
I think we are going to need more information.
A koyker 155, or 160 would be an appropriate loader for it.
If it's anything like a 645 it's WAY WAY WAY too big for a l2650.
I think we are going to need more information.
A koyker 155, or 160 would be an appropriate loader for it.
No direct answer to your question, but the mounting hardware is the biggest issue in adding a used loader to an older machine-if you can even find a loader in the first place.
I would give Koyker a call 800-557-4689 and see if they ever built brackets for this loader on that tractor. Years back there were a ton of Koyker loaders in my area. I had work with them many times to get brackets to put a loader on a different model tractor. Back then they were easy to work with. The chances of you finding a set of used brackets aren't good.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Koyker lists that as model for use on your tractor.
They should at one time have made brackets to fit it, if you get lucky they still do.
Call them and see what they can do for you.
They should at one time have made brackets to fit it, if you get lucky they still do.
Call them and see what they can do for you.
Last edited:
Just a quick follow up. I gave koyker a call. They have sent my request to engineering there. I should have a answer anytime. Thanks for the responses