Hello, very new here and very new to forums so please bare with me. We have a Kubota B2650 and the front loader/bucket lever keeps slipping off a small pin it rotates on. Looks to me like something should be on the end to keep this from happening but even the diagram seems like it just sits on there. Any advice or if you had a similar issue would be helpful.
Loader Lever assmebly slipping off pin
- Thread starter trevoro
- Start date
GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Pretty sure it's the arm 'J28xxx with big B in circle' that's falling off. Can't see in the 'closeup' picture if the 'lock the levers' mechanism is all there, maybe interfering with the parts ? Maybe #170 clip isn't there, allows for #150 to move, pulling the part off the post ??
Only going by the drawing, but a good cleanup and 'looksee' should show HOW it's failing. Another 'be nice to be there,to SEE it' problems.
Only going by the drawing, but a good cleanup and 'looksee' should show HOW it's failing. Another 'be nice to be there,to SEE it' problems.