Loader Lever assmebly slipping off pin

trevoro

New member

Equipment
Kubota B2650
Jan 8, 2025
1
0
1
New York
Hello, very new here and very new to forums so please bare with me. We have a Kubota B2650 and the front loader/bucket lever keeps slipping off a small pin it rotates on. Looks to me like something should be on the end to keep this from happening but even the diagram seems like it just sits on there. Any advice or if you had a similar issue would be helpful.
1000011966.png
1000011969.jpg
 

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
12,690
5,499
113
Greensville,Ontario,Canada
Pretty sure it's the arm 'J28xxx with big B in circle' that's falling off. Can't see in the 'closeup' picture if the 'lock the levers' mechanism is all there, maybe interfering with the parts ? Maybe #170 clip isn't there, allows for #150 to move, pulling the part off the post ??
Only going by the drawing, but a good cleanup and 'looksee' should show HOW it's failing. Another 'be nice to be there,to SEE it' problems.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
32,347
8,032
113
Sandpoint, ID
Looks like the bracket might be bent and or the bushing (20) is worn.

1736481313199.png