List of grill guard fabricators and or skid plates..

[G-grandpa]

not everyone is a fabricator or welder so we rely on others... I am looking to get a nice grill guard and like most thing I do, research it to death..
who else can we add to this tiny list?

https://zookswelding.com/shop/ols/products/lx-2610-3310-grill-insert

5ElevenDesignZ | Heavy Duty Kubota John Deere Grill Guards | 19330 West Old US Highway 12, Chelsea, MI, USA

At 5Elevendesignz.com, we manufacture quality compact tractor accessories for Kubota, John Deere and Kioti. We specialize in grill guards and other equipment protection. Heavy duty guarding solutions for all your equipment needs. Made in the USA, in stock and free shipping.

www.5elevendesignz.com

 

[G-grandpa]

light brackets and filter guards

LX Hydraulic Filter guard

LX Hydraulic Filter guard

www.specialtyrepairscustommods.com

 

[B737]

I just ordered Fuel guard, HST and Transmission filter guards from Paul and Kathy at Specialty last week. They are really great people to work with. I have always appreciated Pauls work. I use his light perches too which are put to the test in the woods.

speaking of woods, I was going to go guards free, until I got under the machine after brush hogging and saw the rub marks from brush all over the filters.

 

[jimh406]

I bought the hydraulic and fuel Zooks guards and the 5 Eleven Designs front grill guard before I busted either one. I’m thinking about rear light guards after hearing about people busting them with quick hitches. Mine do barely clear, but I don’t know those light guard would help or not.

 

[G-grandpa]

With all the different filter guards, do you need to take them off to change the filter?

 

[CFarm45]

https://lownperformance.com/
Lown Performance has some nice looking grill guards, “chin” guards and chain buckets. Sounds like they will have an LX model available soon as well.

 

[dwhit87]

Ordered my grill guard from lown performance a couple months too late but finally got it, after I put a couple of holes in the grill ha

 

[TheOldHokie]

Ordered my grill guard from lown performance a couple months too late but finally got it, after I put a couple of holes in the grill ha

I only punched one hole in my grille before ordering a guard from Lown. Just this minute finished installing the new $90 grille. The chin guard also easily holds 2 x 10' of 3/8 chain with grab hooks.

Dan

 

[Willbeone]

I only punched one hole in my grille before ordering a guard from Lown. Just this minute finished installing the new $90 grille. The chin guard also easily holds 2 x 10' of 3/8 chain with grab hooks.

Dan

I just got my Lown Performance grill guard with chin guard/chain bucket installed.

 

[scratchnsniff]

Another very satisfied Lown customer here! Their diff lock plate is a winner, too.

 

[fried1765]

I just ordered Fuel guard, HST and Transmission filter guards from Paul and Kathy at Specialty last week. They are really great people to work with. I have always appreciated Pauls work. I use his light perches too which are put to the test in the woods.

speaking of woods, I was going to go guards free, until I got under the machine after brush hogging and saw the rub marks from brush all over the filters.

I absolutely agree!
Paul and Kathy Short are truly great people!
I may be prejudiced though,.....I lived in NFLD. many years ago.
In my opinion: Newfoundlanders are absolutely THE BEST !

 

[B737]

I absolutely agree!
Paul and Kathy Short are truly great people!
I may be prejudiced though,.....I lived in NFLD. many years ago.
In my opinion: Newfoundlanders are absolutely THE BEST !

haha yes they are! I just installed their plates on the LX and had them for the b2601 too

 

[Ussharrylee]

I just got a Lown Performance grill guard for my L6060 and the fit is pretty bad as you can see in the pictures. There is a giant gap in between the Kubota grill and the Lown guard. Also, it is under a ton of tension to get it to attach. My middle brace for the stock Kubota guard sticks out past the front of the guard and the Lown grill hits it.

 

[DustyRusty]

I like your products, but you are missing a big market without something for the BX series of tractors. I am inclined to believe that the BX model is one of Kubota's biggest sellers.

 

[Superjet511]

I like your products, but you are missing a big market without something for the BX series of tractors. I am inclined to believe that the BX model is one of Kubota's biggest sellers.

That one is just about ready to cut.

 

[DustyRusty]

 

[lynnmor]

For 2022, it appears that Kubota will be offering a grill guard for a good price. Hopefully they will be backwards compatible for previous years. See this video about upcoming things, brush guard is at 7:40.

 

[Superjet511]

For 2022, it appears that Kubota will be offering a grill guard for a good price. Hopefully they will be backwards compatible for previous years. See this video about upcoming things, brush guard is at 7:40.

Not sure about half price as he mentioned as I have heard dealer cost is north of $200 but that is yet to be determined. Who knows what retail will be. Looks pretty thin and flimsy with large holes but I may be a bit biased lol. I plan to buy one as soon as they are available and do a comparison to the 5elevendesignz.com products. Regarding backward compatibility, the main guard shown is not the same as current L series. Looks to be from an LX or completely new ..

 

[RichardAaronlx2610]

I have The 511 designz grill guard and couldn’t be happier with the fitment, and the paint on it. Beautiful product for the price. I could have easily had a friend burn me out and bend up a custom guard, but by the time you measure it, draw it, drive to the steel place, buy the steel, fit it, get it coated, and drive back and fourth 4 times, you might as well just buy one done and bolt it on. Highly recommend their guard.

Rich.

 

[jkrubi12]

RichardAaronlx2610, could you reveal the brand/name of your 3rd function kit? I've never seen one on that side thus far. Looks great, thanks in advance!