lift arm

[ynnadresoob]

I have a kabota b7200 one of the arms that lift the three point hitch stripped out does anyone have any ideas I have tried to find another arm with no luck ddoes anyone know if the splines are the same on a different model or know of anyone with a used arm

 

[gpreuss]

This should be quick work for your dealer's Parts Dept. Are the shaft splines still OK?

 

[ynnadresoob]

I have tried a dealer they said it was no longer available I need to find something that will work splines are still good on the shaft so I would rather not try welding it I tried to drill a hole in the shaft so I could use a bolt but the shaft is harder than the drill bit anyone have any other ideas

 

[cerlawson]

Consider a machine shop for building up the stripped opening, followed by machining the splines. Not out of the question for a good mechanic machinist.

 

[kubotasam]

I just went to the Kubota parts site and got the part #. Then went to messicks site and entered it. The original part is discontinued but has been replaced by another # which has been replaced by another #. It looks like a lift arm kit is available. I did this in quite a hurry so I could be wrong. Call Messicks they are great a helping and fast with shipping.

 

[ynnadresoob]

Thank you will go back and research it a little better haven,t had any luck finding a used one

 

[ynnadresoob]

thank you kubotasam for your help checked back with messics the kit will work on a 7200

 

[North Idaho Wolfman]

The price on that kit is really good!
Get a pair of seals for it too.