What is the parked length of the LX2610 with the stock loader and contracted BH77 backhoe? Thanks
I Would guess about 19 or 20 feet with the front bucket on the ground and the backhoe in the travel position. I put mine on an 18 ft trailer, I have to swing the backhoe to the side to get the rear Gate to close. I also set the backhoe bucket on the deck when its on the trailer. When mine goes in the garage I sometimes take the front bucket off and leave that outside for a little more room to walk around it.
I can probably get you a more accurate measurement later if you are looking for an exact measurement.
I Would guess about 19 or 20 feet with the front bucket on the ground and the backhoe in the travel position. I put mine on an 18 ft trailer, I have to swing the backhoe to the side to get the rear Gate to close. I also set the backhoe bucket on the deck when its on the trailer. When mine goes in the garage I sometimes take the front bucket off and leave that outside for a little more room to walk around it.
I can probably get you a more accurate measurement later if you are looking for an exact measurement.
Just shy of 18 ft, 17 ft 11 in I would say. That is with the front bucket level on the ground, and the backhoe locked in transport position. Measured from the cutting edge on the bucket to roughly the upper pin on the backhoe bucket.I'm in no great rush, but at your convenience , a more exact measurement would be helpful. Thanks a lot..
Thanks to all. I get those back home to measure the tractor shed to see if I have an issue. (I'm away at the moment)I got around 19’ and change when I calculated to order a portable shelter for mine