Leaf blower tractor, 3 pt hitch.

[Downeaster]

I know this may sound redundant, but I have been searching for 3 pt mounted leaf blower. Currently I am in my mid 80's, and leaf blowing with a back pack or walk behind is something that exhaust me. i have been searching online for something that could hook up to my 3 pt hit, and let the tractor do the work. I saw a short video on the green site, but nothing on the orange. I would think there would be a good market for a 3 pt leaf blower. I can't be the only overwhelmed by leaves, that has a bx tractor.

 

[Sidekick]

I got a cyclone rake to suck them up. I think a big blower could be dangerous .
Here's one I found with a simple search. The little one should work with a bx.

Agrimetal BW 2500-TP Tractor PTO 3 point Hitch Leaf Blower

We have the Agrimetal BW 2500-TP Tractor PTO 3 point Hitch Leaf Blower for tractors with 25 PTO HP and over, optional hydraulic air deflector available

www.everythingattachments.com

 

[chim]

Here's a brief vid of one I made several years ago. Used a squirrel cage fan from a large air handler we removed. Calculated RPM's and sized pulleys accordingly.

It did work pretty well, but I got tired of it sitting around. For a couple years I blocked off the discharge on the RFM. Earlier this year I scrapped the blower and sheet metal and made a few mods to the frame to make a carryall.

This year I bought a big Stihl backpack. The backpack does take some effort compared with the other methods. It does a better job though.

 

[NCL4701]

Don’t have one. Researched pretty thoroughly a couple years back but it wasn’t a good enough fit for our property to pull the trigger on a purchase. Agrimetal appeared to be commercial quality. https://agrimetal.com/en/project/3-point-hitch-leaf-and-debris-blower/

Recall a couple folks here having them and recommending them. Only one I recall was @B737. I think he’s still around but haven’t seen any posts from him in quite a while.

Looks like they have dealers in your area.

 

[bird dogger]

I couldn't be without my Agrimetal PTO blower to help take care of all the leaves on this farmstead every fall. See post #12 Here.

This one has been virtually maintenance free (occasionally greased) for the last 30 +/- years. It's made in Canada, I believe, but sold in the US through a few different dealers.

If you search "Agrimetal Leaf Blower" on this site, you should find a few threads on them. There's a few other OTT'ers that have this same blower.

For my situation, this blower is worth its weight in gold. The leaves get blown right back into the edges of the woods or shelterbelts. You quickly learn to work "With" the wind and can clean a vast area of leaves in a very short time.....while sitting on your tractor. Sure beats a rake.

If you don't have a place to blow the leaves into and leave them.....you can blow the leaves into a pile and then move/dispose of them by other means. the footprint is quite a bit smaller than the pull behind units. Wich makes it easier for maneuvering around wooded or heavily treed areas. Also, you don't have another gas engine to maintain.

But it really boils down to what will work best for each person's situation.

 

[#40Fan]