Land Pride 48 inch snow pusher ?

[Bearcatrp]

The 60” backdrag is bolted on. It was about $150 option I think, got mine beginning of 2022….

The 48 inch pusher from land pride has no adjustments and welded on backdrag. I’ll get pics tomorrow.

 

[leveraddict]

I never could understand these snow pushers? Isnt my 48" bucket already a snow pusher?

 

[mbob86]

Looks like you found a good solution. I too worked on this problem. My solution was similar. It is probably much easier to lower the shoes than play with the blade. I purchased

 

[mbob86]

My post was cut off. I ordered Hdpe in 3"width by 3/4. I wanted extra width to protect my turf. Please see the attached photo

 

[steveh]

Thanks folks. Am 7 weeks out from rotator cuff surgery so will have to wait awhile before I do this. Will call the dealer to see if land pride makes long bolts. Otherwise, will check with Tractor supply.

I replaced the blade on my Land Pride rear blade and added skid shoes. I ended up needing a few longer bolts in this project and Kubota dealer had them.

 

[Bearcatrp]

My post was cut off. I ordered Hdpe in 3"width by 3/4. I wanted extra width to protect my turf. Please see the attached photo View attachment 117605

That looks good. Where did you buy it?

 

[Bearcatrp]

I never could understand these snow pushers? Isnt my 48" bucket already a snow pusher?

The bucket does work but with the pusher, don't have to fiddle with leveling the bucket. Plus, get more snow collected in the pusher than the bucket.

 

[Bearcatrp]

I replaced the blade on my Land Pride rear blade and added skid shoes. I ended up needing a few longer bolts in this project and Kubota dealer had them.

I picked mine up at the dealer too.

 

[mbob86]

That looks good. Where did you buy it?

Just one of the online services but I can't remember which one. I'm hoping it works well. No snow yet this season.

 

[dieselbob69]

I never could understand these snow pushers? Isnt my 48" bucket already a snow pusher?

It is, but when pushing snow it flows out the sides. The pusher collects it better with less side spillage. Plus its faster. Ever watch one of the front end loaders do parking lot with one on? Just imagine it doing 1/2 the width with bucket only....