La211/bx2230 hydraulic lines help.
- Thread starter Jekstrand
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Looking at it, my best guess logically are these two lines are swapped.
Those should be Power Beyond and Tank.
And that would be the reason the three point / mower don't work.
Those should be Power Beyond and Tank.
And that would be the reason the three point / mower don't work.
Wolfman,
I swapped the two you suggested and no change. 3pt and mower not moving up/down
Put the hoses back. Please explain exactly what is going on here? Do you still have the loader or has it been permanently removed?
Dan
Yay me! I got it figured out….i hope.
The line on left of control valve goes to the nearest line(A), the other two go to the forward two hard lines(B & C). I guess I should have known because of the lengths of the hoses.
maybe this will help someone. I hope folks can see the marks
The line on left of control valve goes to the nearest line(A), the other two go to the forward two hard lines(B & C). I guess I should have known because of the lengths of the hoses.
maybe this will help someone. I hope folks can see the marks
Attachments
Wolfman,
the loader is disconnected for mowing but has been on recently. See my post before this one.
