Replaced pump port and tank port hoses to BX22, now when hooked up, all other hydraulics have no power. PTO in middle position, reconnected quick connects a dozen times. No loader movement, no mower deck raise, no back hoe, or anything. Fluid near full mark, etc. new to this equipment, and need help troubleshooting. Thanks in advance for any help!
LA210 hydraulics troubleshooting
- Thread starter Ghocky
- Start date
I found one of the new hoses I bought plugged up when pressure was applied, then opened up when pressure was released. Tough to figure out, but is working now. Thanks anyway.
Sounds like an end was incorrectly installed, damaged and letting oil down the reinforcement channel, effectively blocking the line. I'm sure you had words with the maker of the replacement line. Nice Catch.