L60 rear remove valve body leak

[TheOldHokie]

Spent an hour pinpointing the leak...it was exactly where my original picture showed it. I took the rear remote coupler bodies off, then got a good look at everything with the machine running.
While looking I found a small shard of metal (maybe 1/8" x 1/4") that was sandwiched in the bottom portion of the 1st rem block...hoping that was the issue. Removed it with magnetic screwdriver, re torqued all bolts. I should have an implement on it in the next few days, but without one right now no leaking.

That will do it. Somebody wasn't practicing good hydraulic hygiene wham they assembled the stack.

Dan