L48 with a BT1100

[coptordoctor]

Guys I have had this tractor for about 6 years never an issue wiith hydraulics till lately. The tractor had been sitting for about two months. I went to dig out a couple stumps and I have no swing movement on the backhoe. If I hold the lever full left or right it Pisses Hydraulic oil out the bottom of the bank of valves. I assume it is out of the swing valve. If I wiggle the control back and forth it sounds like there is something trying to happen but no movement. Like I said if I hold it however fluid comes out. I am thinking maybe the spool is stuck in this valve has anyone experienced this or any ideas?
Thanks. Carl

 

[lugbolt]

You will need to find and fix the leak first and foremost.

 

[coptordoctor]

Guys This site has some very great contributors. I looked through a bunch of posts here and went back and checked stuff again. To my amazement as I have not had the hoe off for 6 months and had used it a couple months ago. The larger quick disconnect was un seated by a hair I mean looking at it you could not tell I pushed on the coupler and it clicked in started unit up all is well. Thanks again guys you have a great site...