L47 TLB Lug Nut Size

[RichardT]

I won't be around my tractor for a few weeks, but when I get to it next I plan on checking the torque on the lugs for my 50 hr service. I know they are larger than 20 mm, the largest socket I had when I looked while doing the oil changes. I should have put a tape measure on it at the time, but I thought it would be easy to research. I cannot for the life of me find the nut sizes in the WSM or Manual or online. Anyone have any idea where to find, as I'd like to purchase before I get back to the property? Or anyone suggest a large socket size 1/2" drive kit, like 20 mm to 30 mm for the L47 wrenching work? And I assume they need to be deep sockets based on the attached pic. Thanks in advance.

 

[MapleLeafFarmer]

edit: I guessed 22mm from my memory but better off safe than sorry so plse. don't rely on this old mans memory.

 

[OntheRidge]

Pretty sure it is 24, I use this set.

https://www.lowes.com/pd/Kobalt-16-Piece-Metric-1-2-in-Drive-Set-6-point-Impact-Socket-Set/5013666725

 

[PoTreeBoy]

Someday you'll want a set of 3/4" drive sockets. Just sayin' . . .

 

[Runs With Scissors]

Or anyone suggest a large socket size 1/2" drive kit, like 20 mm to 30 mm for the L47 wrenching work? And I assume they need to be deep sockets based on the attached pic. Thanks in advance. View attachment 143480

I have this set from the Big A.

https://www.amazon.com/gp/product/B000JLBQV2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1


I have been very happy with Tekton tools thus far.

Edit: Oh I see that set is no longer available, but I'm sure they have a set that would work.


Of course if you like quality tools and have deep pockets,

https://b2b.snapon.com/productDetails/650123/2

(or $25 a week for life....