L4600 Hazard Light

[Waushara- Kubota]

I have an L4600, the top rear fender mounted hazard lights stopped working. When I check with a relay tester to the light socket it shows power and blinks, when I test the relay at the connection under the fender that works. When I put the bulb back in the socket….nothing. The fender hazard lights work, turn signals work etc.

Could it be the switch on the panel that I push to activate the hazard lights?

 

[whitetiger]

Your light is not grounding. Loosen the nut under the fender and retighten it a couple of times.

 

[Waushara- Kubota]

I really hope it’s that simple. I am going to remove the light and clean the fender contact area and try that. Thanks for the suggestion

 

[Waushara- Kubota]

Your light is not grounding. Loosen the nut under the fender and retighten it a couple of times.

Your suggestion worked!! Thank you

 

[North Idaho Wolfman]

Your suggestion worked!! Thank you

He is the Kubota Expert!