I've got my snowblower detached but I can't get the front driveline off of the tractor. The driveline shield is supposed to be spring loaded so you can pull it back but mine won't budge. Any ideas?
L3940/L2194 Snowblower Detachment
- Thread starter ranger118
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Try spraying any part of the coupling with PB Blaster to break loose any rust. And some times a tap on the side of the collar will help it move.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Stick some grease in the fitting before you put it on for the winter, will make it come off in the spring so much easier!
Oh a greetings from Way North of you!
McCall was my first choice of where I wanted to live in ID, Just wasn't any work there at the time.
Oh a greetings from Way North of you!
McCall was my first choice of where I wanted to live in ID, Just wasn't any work there at the time.