i changed over to the quick attach bucket system. I have less lift capacity and breakoutforce now than i had before, which i might add i was very disapointed with. The loader is a L723. has any body else got any complaints. The l3830 should be able to lift and curl something ......
L3830 fel
- Thread starter ajryan
- Start date
I put a QA on my loader and could tell a small difference but it sure wasn't enough that I would change back to the old way. I use my loader alot and it does fine as far a digging power goes.
Was it a Kubota QA or a aftermarket?
Was it a Kubota QA or a aftermarket?
bcbull378
Member
Equipment
GL3830,fel,brush hog,pallet forks,disc,gannon,auger,springtooth,plow,drag,ripper
L3830 with LA723 here and no complaints. Curls 'til a back wheel lifts and lifts more than the bucket will hold.
My L3830/LA723 being abused:
http://s539.photobucket.com/user/FLINCHIST/media/MOV00464_zpsaf08b3b1.mp4.html
My L3830/LA723 being abused:
http://s539.photobucket.com/user/FLINCHIST/media/MOV00464_zpsaf08b3b1.mp4.html
Perhaps your maximum hydraulic pressure is a bit on the low side. Have you checked it against specs?
David
David
LCWELL, if you do lots of dirt moving you should consider adding some teeth to your bucket. It's a night and day difference when you are digging in the dirt. I couldn't do without mine.
Future reference.. If you're trying to move another slab of concrete like that try and get it in the center of the bucket if you can. That way you'll get equal lifting power from both lift cylinders. It kinda looked like that was why your tractor lifted up and twisted on the rear end. Or I missed something and the left front tire dipped down in a pocket in the dirt.