L3800 Rear Remotes

[oldenough]

Has anyone installed the Kubota L7334 rear remote kit? A little pricey at $700 but if it fits and looks good I might go that route instead of re-inventing the wheel. This would go on a L3800.

 

[JasonW]

Interested in this as well. Local dealer quoted me $850 for rear remotes for my L3800. Looking to get them installed with a 3rd valve this summer.

 

[KennedyFarmer]

I would like to know too I have a L3901

 

[nickelplated5s]

Yes to the factory kit and think about doing two sets at the same time. There are good pictures at TBN and notes here under my user name.

 

[cc9016]

Please advise on what TBN stands for.
TY
cc9016

 

[mdhughes]

Tractor By Net, it is another tractor web site. It is for all tractors, not just one manufacture.

 

[rparkinson]

I had 2 factory remotes installed on my machine. I thought about doing it myself, but it is not often in can be done better then the factory. The boys over at Kubota put some thought into how they put these machines together, and by the time you are done I would be surprised if you could do it for less then 700 bucks, providing all the parts are of equal quality. I see it alot on cars, and there is some ok aftermarket stuff for sure, but most of the time it is garbage. Just my thoughts. Good luck with whichever road you take, I will say I could not be happier.

 

[thedevilyoulove]

Interested for my L3901

 

[Agman56]

Interested for my L3901

I installed the Kubota rear remotes on my L3901 and they work great and look very much like factory installed. Worth every penny in my opinion. I did the work myself and it only took a couple of of hours if I remember correctly. Good instructions and pretty straight forward.

 

[mdhughes]

I installed the Kubota rear remotes on my L3901 and they work great and look very much like factory installed. Worth every penny in my opinion. I did the work myself and it only took a couple of of hours if I remember correctly. Good instructions and pretty straight forward.

Do you have any pictures of the install?

 

[nickelplated5s]

I installed the Kubota rear remotes on my L3901 and they work great and look very much like factory installed. Worth every penny in my opinion. I did the work myself and it only took a couple of of hours if I remember correctly. Good instructions and pretty straight forward.

They're the same as factory installed. Instructions for my 4740 were bad. North wasn't at the top of page and I don't think they were all the same way. Once I had it figured out it was easy. Taking the seat out wasn't worth the trouble.