L3650 Fan Belt Change
- Thread starter rrrrrrrrrr
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
The steering linkage is no where close, so no, no removal required.
Are you talking about the shaft halfway up the motor?
That would be the fan drive shaft and yes that one you will need to break it at the water pump pulley to be able to remove the fan belt.
Are you talking about the shaft halfway up the motor?
That would be the fan drive shaft and yes that one you will need to break it at the water pump pulley to be able to remove the fan belt.
Last edited:
Pau7220
Well-known member
Equipment
L3650 GST, Landpride TL250 FEL w/ Piranha, 6' King Kutter, GM1084R Finish
As long as you've got your nose in there .... take a close look at the fan blades for cracks.
Here's how I know...
Of course it took out the battery too!!
Here's how I know...
Of course it took out the battery too!!
Attachments
Last edited:
Yes that is the shaft not steering. It has to come apart at the water pump only? It has a joint of some kind midway but you say it don't come apart? Thanks for the help & checked fan blade it ok. Thanks for the info to all .