L3410 4WD not working

[Cajin Kevin]

Bought a very used L3410 about 2 months ago. Noticed the 4WD slipping and disengaging. Replaced the couplings on the shaft from rear to front. When I pulled the front coupling off, this is what I found. The teeth on this front shaft are almost non-existent. (This is the front, looking up from the bottom of the tractor, where the front coupling would fit.) What am I looking at as far as repairing this? If I pull this cover off, can this “gear and shaft” be replaced? Or is it more extensive than that. Thanks for the help!

 

[ruger1980]

Unfortunately that will require a new bevel gear set. The entire differential will need to be removed, gone through and reassembled.

 

[Russell King]

You can see the assembly in illustrated parts list at this site.

Kubota Tractor Corporation - Illustrated Parts List

- K-PAD - Parts Lists - Illustrated Parts Lists - diagrams

apps.kubotausa.com

Here is the illustration for the front differential showing part #10 which is what I believe you need to replace. There are other parts that should be replaced and you (probably) get the gear marked A along with #10 part number. There is a break in that part number according with the serial number of the tractor.

 

[North Idaho Wolfman]

Kubota #TA040-12013 ASSY GEAR,BEVEL

ASSY GEAR,BEVEL

www.messicks.com