L2501 Loader / Valve Help Needed

[Kennyd4110]

Had a customer send me this picture, says he has an L2501 with (unknown) loader. Communication with him is sparse currently due to very poor cell service on his end. I am trying to help him with a gauge setup he purchased from us, but it does not fit the QD's.

This does NOT look like OEM valve to me, maybe not even an OEM loader? Kub uses females on the hoses as far as I know, and not Besko valves?

 

[North Idaho Wolfman]

The Kioti's and Mahindra's used those valves, and yes some aftermarket too.
I think I have a set of the female sides from that valve (can't say 100% for sure that they are the exact same) and yes they are an odd size.

Is he in Canada? As some Canadian dealers use non Kubota made loaders.

 

[North Idaho Wolfman]

Mahindra valve:

CONTROL VALVE BESKO FOR MODELS 4540-4Loader, 4550-2Loader, Max 26/AML205 Loader, 4025/AML333 Loader (ANS8811084-1)

billstractor.net

 

[Kennyd4110]

He is in South Carolina. He sent some other pics with the couplers disconnected so I think I have them figured out now, but he is not responding to emails yet.

 

[TheOldHokie]

He is in South Carolina. He sent some other pics with the couplers disconnected so I think I have them figured out now, but he is not responding to emails yet.

Part numbers on the couplers?

BTW - I see we are neighbors.

Dan

 

[Chanceywd]

Just observations. the hoses look quite old and cracking, the loader mount looks nothing like my LA525 but maybe older ones before my 2+ years of Kubota time were different. And it looks like the dif loc is behind his foot so like mine a L2501dt not a hst. I think the HST loc is on the left side?
Bill

 

[Kennyd4110]

Loader mystery solved, its an Ansung loader, made in Korea, distributed by Ansung-USA. News to me...LOL.

 

[Kennyd4110]

Part numbers on the couplers?

BTW - I see we are neighbors.

Dan

Hey Dan...yup, we are about 40 minutes apart.

I think they are ISO 5675 "AG"s in 1/4", will confirm when I get some more measurements from him. Figuring out couplers is something I doo ALL THE TIME, I'm so lucky!

 

[TheOldHokie]

Loader mystery solved, its an Ansung loader, made in Korea, distributed by Ansung-USA. News to me...LOL.

I have actually heard of them. Have you dfigured out what type coupler was used?

Dan

 

[TheOldHokie]

Hey Dan...yup, we are about 40 minutes apart.

I think they are ISO 5675 "AG"s in 1/4", will confirm when I get some more measurements from him. Figuring out couplers is something I doo ALL THE TIME, I'm so lucky!

Makes sense - 1/4" is probably the only size they could get to fit the port spacing on the top of that valve.

Dan

 

[Chanceywd]

Makes sense - 1/4" is probably the only size they could get to fit the port spacing on the top of that valve.

Dan

I have used a lot of the 5675 1/4". I get them on ebay and the ones I get are the same as snow plow style. like for meyers fisher etc. They come in both ball and poppet .
edit

http://www.ansungusa.com/pdf/PartsManuals/FELK-SL2545C-QB-NewModel.pdf

Bill

 

[Kennyd4110]

On page 13 of that manual, it clearly shows the females on the hoses, just like what Kub does, but that is not the same as this customers machine.

 

[TheOldHokie]

On page 13 of that manual, it clearly shows the females on the hoses, just like what Kub does, but that is not the same as this customers machine.

And unlike Kub they clearly label the pressure, power beyond and tank ports on the valve

Dan

 

[Chanceywd]

Everything Attachments sells the ansung loader.

Bill

 

[Kennyd4110]

Just to wrap this puppy up, the couplers are 3/8" ISO 7241 "A" style, those seem to be common on Korean made equipment.