Hi' I'm new to this forum and just picked up a L225 2wd. I'm looking for a 4 bolt front wheel. I am also looking to replace or rebuild lift cylinders for the loader (they leak down within 15 minutes) any info on parts would be greatly appreciated. Thanks
L225 front wheels
- Thread starter Top Fuel
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
For the wheels try miller tire or hey wheel.
For the loader, that's semi normal for them to bleed down.
In order to give you any more info need the loader model number and serial number if you can get it.
For the loader, that's semi normal for them to bleed down.
In order to give you any more info need the loader model number and serial number if you can get it.
rbargeron
Well-known member
Lifetime Member
Equipment
L5450, L48, L3250, L345 never enough attachments
Four-lug 15" wheels (32210-11640) for a L225 are hard to find. Places like Messick's make an effort to find wheels that will fit -not sure they'll look like the originals....
Assuming yours look like this? Original tire size is 4.00-15 for the L225.
Measure your bolt circle diameter (bolt-to-bolt across the center) - compare that and center hole size to available wheels - offset is not critical if the width between beads is near 4" +/- .
Here's one from Miller tire that may be close. Another possibility mighty be to get repairs done on the old one? What's its condition?
Assuming yours look like this? Original tire size is 4.00-15 for the L225.
Measure your bolt circle diameter (bolt-to-bolt across the center) - compare that and center hole size to available wheels - offset is not critical if the width between beads is near 4" +/- .
Here's one from Miller tire that may be close. Another possibility mighty be to get repairs done on the old one? What's its condition?
Last edited: