Can any one tell me about the L2202DT-M. I have been using our unit for rotovating in greenhouses and seem to have hit a dead end with the clutch. The gears were not wanting to select and I followed a thread on this site and adjusted the clutch arm and the gears were selecting perfectly thereafter, but this only worked for a couple of days. Now there seems to be no resistance on the clutch pedal. I have checked the spring below the foot board and this is in place. Have I left something out of my adjustment, or do I have a failed clutch. The unit only has 2115 hours on the clock. Sadly I purchased the unit as a second hand/used import and do not have any manuals to help me. Am I able to get a workshop manual for this unit? If so where am I able to get one and are there e-book versions available? Things take a while to get to South Africa and at times books go missing in the post...hence the request for e-book if possible. Any help would be appreciated. Thanks David - Rhodiadale
L2202dt-m
- Thread starter rhodiadale
- Start date
Looks like this is going to be a mission. Hopefully I will find a manual and then hope that I can get the parts in South Africa. Pretty sad that the clutch has probably failed after only 2000hrs.
Thanks for your input Vic. Have you any idea where I can start to look for a workshop manual that might help. As said does anyone create e-book versions or possibly PDF downloads on getting to the clutch / splitting the unit?
Right now any help would be greatly appreciated.
Right now any help would be greatly appreciated.
Thanks Vic. You are right there are a lot of individual plates to remove. Hopefully once apart I will be able to get the parts I need here in South Africa. Anything Kubota here is hugely expensive....Your comment on the rice farmer made me smile, I think my tractor operator is no better, if something makes a strange noise either gun it a bit more to beat the noise or just carry on and hope it goes away. A spares supplier's dream.
If I get stuck I give you a shout again. You have no idea how valuable your input on this site is.
If I get stuck I give you a shout again. You have no idea how valuable your input on this site is.
You may want to try this link for a parts diaghram for the l185 may help http://www.kubotabooks.com/AutoInde...s/&AutoIndex=f93d4745ef9e6af9f84c0a72e77221f9 this may help.handy
Thanks for the info, Handyman. Looked up the manual for L185 and this seems to be the equivalent. Have opened up and found the fingers on the diaphragm badly worn....almost through!! So appears a problem with the release bearing and diaphragm.
Does the L185 have the same motor D1402 as the grey kubota L2202DT ive checked and it seems like the L2550 would be a closer fit ? i dont know im just trying to find a download for my grey K thanks im looking for any info ????
carl..
carl..