Hallo everybody,
tried to hook an analogue water temperature gauge on my L2201DT. Pretty easy job but the readings are 40-45 Celsius when idle and 60 degrees under pressure. I tested the sensor before installing it and works fine. I use 50-50 water with antifreeze so I would expect a normal temperature at around 100 Celsius to 120 under load. The tractor works fine but I can’t figure out why I get these readings on the gauge.
Any recommendations are welcome!
tried to hook an analogue water temperature gauge on my L2201DT. Pretty easy job but the readings are 40-45 Celsius when idle and 60 degrees under pressure. I tested the sensor before installing it and works fine. I use 50-50 water with antifreeze so I would expect a normal temperature at around 100 Celsius to 120 under load. The tractor works fine but I can’t figure out why I get these readings on the gauge.
Any recommendations are welcome!
Attachments
-
385.6 KB Views: 279
-
419.5 KB Views: 465
-
285.3 KB Views: 295
-
485.5 KB Views: 413