Full disclosure: I'm a new tractor owner and need some help. I just bought a 1989 L2050 and I'm replacing all the fluids. The manual shows that it needs "gear oil", but for the life of me I cannot figure out where it gets added/changed. Does anyone have any experience with this model tractor?
L2050 Gear Oil
- Thread starter jh4041
- Start date
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Use Kubota UDT or a good quality compatible fluid for all of the "gear oil", which is better known as hydraulic fluid.
You need to get the OPS manual and the WSM (aka service manual) to get the exact location of all fluids.
Typically there is 3 drains on the main sump (transmission and rear end) and three drains on the front axle if its a 4wd, none on 2wd.
You need to get the OPS manual and the WSM (aka service manual) to get the exact location of all fluids.
Typically there is 3 drains on the main sump (transmission and rear end) and three drains on the front axle if its a 4wd, none on 2wd.