Hello everyone, new member and tractor owner. I recently purchased a L175 tractor and everything seems to be working fine but i have noticed a small leak from the adjuster knob for the hydraulics under the seat. I would like to get it fixed before it turns into a bigger issue. Im assuming there is some type of o-ring that needs to be replaced but i haven't found any info on getting to it. Thanks for any help, attached are photos of the adjuster
L175 Hydraulic Leak
- Thread starter Carolina_Cubota
- Start date
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Why are all those bolts missing around the perimeter? You in the process of removal?
Look at this diagram - there are several places that might need attention
Look at this diagram - there are several places that might need attention
Yes i took the 5 bolts out to clean up the threads and repaint, any idea on how to get to that o-ring? I tried unthreading the adjustment knob but it gets to a stop point both ways.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Thanks for the help, getting the snap ring out was a PITA but straight forward from there. I attached a few photos of the threaded part assembly incase anyone in the future has the same issue and would like a reference.
Attachments
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
You plan on replacing that O ring ? Hard to see shape of clearly in the picture - but replace it and see if that stops the leak.
