L1501DT Ignition Switch Wiring

josh64

New member

Equipment
L1501DT, BX2360 with LA243 FEL and mower deck.
Jan 8, 2011
15
0
1
Western Australia
Hi everyone :)

I'm hoping someone can help me out because I can not find a wiring diagram for my L1501DT's switch anywhere.
All of the wiring diagrams I have seen so far (L185, L235) have a different number and orientation of connectors.

I've attached a photo of the 6 connectors (two are bridged...) as they are on the back of the key barrel (the barrel is upright in the photo).

I basically need to know what wires go where.... I dont think colours will help as there are two yellows, a red, a red/white, a white and a red that are joined together.
The key positions are:
1. off
2. on
3. on / high beam lights
4. on / low beam lights

The two bridged connectors have a 'B' stamped next to them, and going clockwise from the 'B', there is L1, T, IG, and L2.

Thank you in advance for any help you can provide me!
 

Attachments

Last edited:

LRP

New member
Sep 29, 2010
202
0
0
canada
Re: L1501DT key switch wiring

B is obvious, battery. L1 AND L2 are lights, ig means ignition and if the switch
dont have a start position , this goes to a start button. T goes to the hour meter and position lamps, work lamps, ect
Louis


The two bridged connectors have a 'B' stamped next to them, and going clockwise from the 'B', there is L1, T, IG, and L2.

Thank you in advance for any help you can provide me![/QUOTE]
 

josh64

New member

Equipment
L1501DT, BX2360 with LA243 FEL and mower deck.
Jan 8, 2011
15
0
1
Western Australia
Re: L1501DT key switch wiring

Thanks for your help Louis, I'll post back if I get everything working how it used to!
 

josh64

New member

Equipment
L1501DT, BX2360 with LA243 FEL and mower deck.
Jan 8, 2011
15
0
1
Western Australia
Re: L1501DT key switch wiring

Thank you so much! My tractor is alive again :)

Now on to changing all of the oils!
 

LRP

New member
Sep 29, 2010
202
0
0
canada
Vic; theres 10,000 comedians out of work and your trying to crack jokes.
u da man!!!!!
 

curtishrycaj

New member
Aug 8, 2013
5
0
1
United States
Re: L1501DT key switch wiring

Hi LRP,
I am new too Orange and am trying to replace the ignition switch in my L1501DT. I have a new Kubota switch tom replase the old but the old one is not factory. Having some trouble figuring it out. Can you help?
Thanks
Curt
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
29,351
5,634
113
Sandpoint, ID
Curt, LRP hasn't been on since 6-19-11, but hopefully others can help.;)