L1500 Wire Loom Cover

billrigsby

Well-known member

Equipment
L1500DT Too many implements, or is there such a thing?
Mar 17, 2015
1,023
208
63
Florissant CO USA 8213'
www.facebook.com
Does anyone out there have a source for the correct plastic cover that slips over the wiring loom on the L 1500. I have restored several American and a couple British cars but never a Japanese vehicle and I'm not sure where to get this as none of the vehicles I've ever worked on have had this sort of a cover. I believe its 1/4 inch or 3/8 inch thin walled black plastic tubing. Did not measure it before I left the shop tonight, too cold to go back out there now.


Thanks
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,790
2,600
113
Bedford - VA
Does anyone out there have a source for the correct plastic cover that slips over the wiring loom on the L 1500. I have restored several American and a couple British cars but never a Japanese vehicle and I'm not sure where to get this as none of the vehicles I've ever worked on have had this sort of a cover. I believe its 1/4 inch or 3/8 inch thin walled black plastic tubing. Did not measure it before I left the shop tonight, too cold to go back out there now.


Thanks
I have bought this before:

Is this what you are talking about?

http://www.amazon.com/Install-Bay-S...=1447041478&sr=8-1&keywords=plastic+wire+loom
 

coachgeo

Well-known member

Equipment
L225 w/woods Few Mowers & Back Blade, D722 in Motorcycle (Triumph Tiger), LMTV
Nov 16, 2012
2,460
35
48
Southern OH
Close, I have some of that in the shop.
To be correct, it needs to have a smooth
body not ribbed.
Can you get large diameter heat shrink by the roll? Just don't heat it much?