L1500 Wire Loom Cover

[billrigsby]

Does anyone out there have a source for the correct plastic cover that slips over the wiring loom on the L 1500. I have restored several American and a couple British cars but never a Japanese vehicle and I'm not sure where to get this as none of the vehicles I've ever worked on have had this sort of a cover. I believe its 1/4 inch or 3/8 inch thin walled black plastic tubing. Did not measure it before I left the shop tonight, too cold to go back out there now.


Thanks

 

[85Hokie]

Does anyone out there have a source for the correct plastic cover that slips over the wiring loom on the L 1500. I have restored several American and a couple British cars but never a Japanese vehicle and I'm not sure where to get this as none of the vehicles I've ever worked on have had this sort of a cover. I believe its 1/4 inch or 3/8 inch thin walled black plastic tubing. Did not measure it before I left the shop tonight, too cold to go back out there now.


Thanks

I have bought this before:

Is this what you are talking about?

http://www.amazon.com/Install-Bay-S...=1447041478&sr=8-1&keywords=plastic+wire+loom

 

[billrigsby]

Close, I have some of that in the shop.
To be correct, it needs to have a smooth
body not ribbed.

 

[coachgeo]

Close, I have some of that in the shop.
To be correct, it needs to have a smooth
body not ribbed.

Can you get large diameter heat shrink by the roll? Just don't heat it much?

 

[bradmond]

McMaster-Carr has it...look for chemical resistant sleeving.

http://www.mcmaster.com/#standard-cable-sleeving/=zquxwl

 

[billrigsby]

I found something almost identical at the local Electronics (junk) store.
Almost have all the wiring re-done.

 

[billrigsby]

Got the whole thing done, and tested.

 

[coachgeo]

OMG!

I followed the link to McMaster-Carr........I will never get off that page!

Gotta agree. A place called Heaven