KX040-5 tablet setup for Indeco Mulcher

[ofsVegas]

I recently purchased my first excavator and a mulching attachment. I’m having a little trouble following the excavator manual when it comes to setting it up in the tablet for AUX2. I know it’s very important to setup one way flow. Does anyone know of a website or a YouTube video that gives a good walkthrough for proper setup?

Thank you,
Richard

 

[B2710]

If you want one way flow, just use the breaker mode setting, that is what I use for my rotary cutter as it is setup for one way flow from the factory. You can create a separate mode for your mulcher by going into the aux screen on the display and selecting mode and to the first open mode which should be number 3, and then adjust the flow on the most left line on the display, leave all the other flow settings at the minimum setting. The OM is not very clear but it is not hard once you start playing with screens. There are a few videos that mention the modes and show how to adjust the flows but nothing in depth for the -5.

 

[EPIC]

Thanks for that, I have the same questions.