Kubota L3560 hydraulic problem

godlesv

New member
Mar 25, 2016
1
0
0
Tewksbury
After 5 minutes the hydraulics get sluggish then stop working. Recovers after resting. Bucket loader, power steering and transmission stop. Can't tell if three point is workingHave backhoe on the three point.

What can I check ?


Sent from my iPhone using Tapatalk
 

ItBmine

Well-known member

Equipment
B2620, RTV-X1100C
Jan 21, 2014
1,381
385
83
Canada
You did check the fluid level correct? Sounds like it is starving out when warm.
 

sheepfarmer

Well-known member
Lifetime Member

Equipment
L3560, B2650, Gator, Ingersoll mower
Nov 14, 2014
4,451
679
113
MidMichigan
HST? how many hours since hydraulic filter and fluid change if there is enough in there at the moment? Any error messages on the intellipanel?
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
30,543
6,598
113
Sandpoint, ID
I would say it sounds like the pump is dead heading and the system is over heating.
Has anything be added or changed to the tractor after stock build?
 

whitetiger

Moderator
Staff member

Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
Nov 20, 2011
2,941
1,399
113
Kansas City, KS
Check the rubber suction hose between tube and hydraulic pump. They have a tendency to crack and allow air to be sucked into the pump.
 

lugbolt

Well-known member

Equipment
ZG127S-54
Oct 15, 2015
5,245
1,923
113
Mid, South, USA
Deadheading at the 3 point hitch could be a cause, but usually the system gets weaker the longer it runs. By time it stops working, usually the transmission case is VERY hot. If that's the case, it's possible that the lift feedback rod is out of adjustment...or lift lever bent to cause it to be out of adjustment.

Suction filter could be plugged or partially plugged. Contaminated fluid. What kind of fluid is in it? Super UDT2 or?