hello everyone, just wondering if anyone knows what the rear lug nut pattern is on a kubota L2501
Kubota L2501 rear tire lug pattern
- Thread starter joncasmathew
- Start date
BigG
Well-known member
Equipment
l2501, FEL, BB, Rotary cutter, rake,spreader, roller, etc. New Holland TL80 A
Perhaps if you explain what you are really looking for you will get the answer you need. If you already have the tractor, you already know the lug pattern, as you imply...
BigG
Well-known member
Equipment
l2501, FEL, BB, Rotary cutter, rake,spreader, roller, etc. New Holland TL80 A
May be you are not asking the right question. Are you trying to find wheels for your tractor and need the info for that?
If you have the ability to make the spacers, do you not have the ability to measure the lug spacing? Bit confused here. But understand as well, as I was wondering the same thing about my B2910. Measuring the studs seems cumbersome, especially since the rears are loaded and a pain to remove if necessary.
You also may need the dimensions of the wheel pilot if one is used.
Just remembered there was another thread here that was related, and I think Lugbolt posted a chart that listed the bolt circle diameter for a number of tractors, including L models, and it included other details. If I happened to watch that thread I will post the link. Maybe someone else remembers it?
Actually that thread was one where I posted a similar question. If you check out the following link you may find what you need.
The L2501 is listed in one of the postings.
Here is the link:
www.orangetractortalks.com
Hope the link copied and pasted correctly.
The L2501 is listed in one of the postings.
Here is the link:
Tractor Wheel Database Somewhere?
I would like to know the specifics of the rear wheels on my B2910. Of course I could measure and hopefully accurately determine the wheel lug bolt (and stud) hole circle diameter and the wheel pilot size. But I think to get an accurate measurement I would have to remove a loaded tire. I would...
www.orangetractortalks.com
Hope the link copied and pasted correctly.
Actually it was eserv I was thinking of...Actually that thread was one where I posted a similar question. If you check out the following link you may find what you need.
The L2501 is listed in one of the postings.
Here is the link:
Tractor Wheel Database Somewhere?
I would like to know the specifics of the rear wheels on my B2910. Of course I could measure and hopefully accurately determine the wheel lug bolt (and stud) hole circle diameter and the wheel pilot size. But I think to get an accurate measurement I would have to remove a loaded tire. I would...
Hope the link copied and pasted correctly.
red face is embarrassed, not angry!