My L245 DT started spraying out engine oil on the right side of the block near the oil filter through a small round hole. I am trying to figure out what caused this. The oil light came on and I shut her down. I added oil to restart the engine but the oil ran out of the same hole. What do I do. Help Please.
Kubota L245DT Oil spraying out the right side block
- Thread starter blackberry
- Start date
coachgeo
Well-known member
Equipment
L225 w/woods Few Mowers & Back Blade, D722 in Motorcycle (Triumph Tiger), LMTV
rbargeron
Well-known member
Lifetime Member
Equipment
L5450, L48, L3250, L345 never enough attachments
The pressure sender is on the left side up at the rear corner of the head.
On the right side at the oil filter there's a relief valve and a safety valve as well (see pdf). Not sure why is has both. Are all of the parts there? Maybe the safety valve has failed open?
On the right side at the oil filter there's a relief valve and a safety valve as well (see pdf). Not sure why is has both. Are all of the parts there? Maybe the safety valve has failed open?
Last edited:
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
I recall reading a thread with a similar problem. There may be a small plug similar to a freeze plug that has fallen out of the hole. Search may be your friend. You may be able to find it on a parts diagram.
I recall that the fix was to glue in a shortened steel bolt or reinstall the plug if you can get it
Sent from my iPad using Tapatalk
I recall that the fix was to glue in a shortened steel bolt or reinstall the plug if you can get it
Sent from my iPad using Tapatalk
Thanks for all your help. I talked to Kubota today, they ordered me a plug. I will let you know how things turn out. 
Do you know the part #? My dealer is having a tough time locating it.Thanks for all your help. I talked to Kubota today, they ordered me a plug. I will let you know how things turn out.