Kubota L245 wheel hub issue

[RedCyclone]

Okay, so I actually have a L225, but the front axle is from a L245. So, I use the 34220-11110 spindle. My wheel hub broke and for the love of me I can't find it. I know that there's plenty of hubs compatible with 34220-11110, but the hub that broke has a 4X4.5 bolt pattern and a 62mm bore hole. I know that if I have to, I could just order a compatible hub and just put a spacer to convert it to 4X4.5, but if I can avoid it, that would be for the best. Thanks for any help in advance.

PS I tried welding the hub back together but the material isn't weldable, or at least not with the equipment I have.

 

[North Idaho Wolfman]

You might or might not have a L245 axle, as a L245 axle has a 6 bolt hub, but you have a l225 hub.

https://www.amazon.com/Interchangeable-34150-11310-34150-11310-34150-11312-3415011310/dp/B08C8PCX7K

 

[RedCyclone]

So, I've ordered this already just in case. It still hasn't shipped, but it says it should get here in 6-8 days. But I've used that same part number and had received a smaller wheel hub. I've crossed reference with Kubota and sure enough, I have the front axle of a L245 on my L225. If this one comes back as a small hub, I'm just going to get a hub from a L245 and a spacer.