Kubota front weigts dimensions: Need help pls!

[Africa]

Hi,

Can anyone help me with dimensions of real kubota front weights. A drawing or photo with measurements will help a lot. I have a Kubota 2410 and a mate will laser cut some weights for me. I use a Locust 125 slasher on it and need some front ballast.

Thank you,
from Africa

 

[ptwyz]

Africa, first of all welcome to the site!

There should be many individuals who will be able to help you with what you need.

When they do, I am going to be shamelessly listening because I am interested in case weights for the front of my BX.

So, thank you for your post and your question!

 

[Africa]

I'm going to cut a rectangle 20mm steel: 300X150 about 7kg each and bolt about 7 onto the front, should be sufficient. Will post a pic when its done!

 

[handyman]

Most people do what you are describing. Some will also build a grating on the top to help protect the radiator that is what I am planning to do. MOST OF ALL WELCOME TO SITE. someone will probably jump in and show you a picture of original if not check kubotas website or check ebay. I have seen them both places before. Good luck handy

 

[Africa]

Here she is:

 

[handyman]

Africa like it. How much weight did it add? like your tractor nice. handy