Kubota Diesel Turbo Opinion

[Webn237]

Alright guys I need an opinion on installing my RHB3 turbo to my kubota diesel golf cart. Which way would be best to mount?

1.) Mount direct onto the manifold with exhaust forward. (I would need to make a U shape downpipe to go to exhaust tip. Probably best for intake)
2.) Mount direct onto the manifold with exhaust back. (would need a S shape downpipe to go to the exhaust. The intake would also be close to the body of the cart. )
3.) Mounted offset towards the middle of the motor. Would need to build a pipe to go to turbo. (still need a S shape downpipe. And the intake for turbo would have better chance of getting cooler air.)

Sent from my SM-G935R4 using Tapatalk

 

[JeffL]

I would install the turbo so the exhaust and intake plumbing are separated as much as possible. Keep the heat away from the intake, engine, trans, and body
Another thought the oil return line is gravity return to pan, not pushed by oil pressure. Keep all the down angles steeper than 45 deg. Inlet into the pan has to be above the high oil level. Jeff