Does anyone know if there is one available? I'm in the process of repainting my L3200 and it would be a lot easier to replace the warning decals than to tape them all off. I've looked through online parts breakdowns and don't see one. Thanks
Kubota decal kits.
- Thread starter Dwats
- Start date
freewheel3
Active member
Equipment
MX5000DT LA852, BX1800D, B6000DT, B6200HSTD, B7100HSTD, L185, T1700HX, ZD1211
I doubt you'll find them in a complete kit from a dealer, but they should be available individually. I've bought them for a few different tractors over the years. Usually the price isn't too bad either.
whitetiger
Moderator
Staff member
Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
They are available in Kits from a Kubota dealer, Front Kit, and Rear kit. They are listed under the "Labels" section in the parts breakdown oline.
The trick is knowing what term to look for. In Kubota's case the secret term is LABEL
Go to the Messicks site and look for parts for your L3200
Then put the word Label in the same box that you entered L3200 in and you will see a lot of labels.
Some even have photos.
Messicks
Whitetiger's advice will be more helpful than mine!
Dave
Go to the Messicks site and look for parts for your L3200
Then put the word Label in the same box that you entered L3200 in and you will see a lot of labels.
Some even have photos.
Messicks
Whitetiger's advice will be more helpful than mine!
Dave
Most Kubota "decals" are available individually but I know of no "kits."
I've bought a couple for the MMM on my 1993 B1750 within the past year or two.
As previously mentioned, Kubota refers to such as "labels."
SDT
Bmyers
Well-known member
Lifetime Member
Equipment
Grand L3560 with LA805 loader, EA 55" Wicked Grapple, SBX72 BB, LP 1272 mower
Bmyers
Well-known member
Lifetime Member
Equipment
Grand L3560 with LA805 loader, EA 55" Wicked Grapple, SBX72 BB, LP 1272 mower
Amazon.com: MFX Design Danger Stay Away from My Tractor Sticker Decal Bumper Sticker Decal Vinyl - Made in USA 3.5 in. x 2.5 in. : Automotive
Buy MFX Design Danger Stay Away from My Tractor Sticker Decal Bumper Sticker Decal Vinyl - Made in USA 3.5 in. x 2.5 in.: Bumper Stickers, Decals & Magnets - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
smile.amazon.com
The L3800 I bought used had some scratched paint issues as well as peeling decals on the loader arms. As close as the 'Kubota matched' paint I bought was, you could see where I masked off the decals and painted above.
Easy solution. Remove the decals, paint the arms and get new decals on Ebay. There are a load of styles, fonts and sizes. I went with one that wasn't the same as the original. I like it.
Easy solution. Remove the decals, paint the arms and get new decals on Ebay. There are a load of styles, fonts and sizes. I went with one that wasn't the same as the original. I like it.
Thanks, I had seen they were available this way. Was just hoping there was a kit.
Yeah I agree. But I've been thinking of selling the tractor. If I do I would at least like to have the warning labels replaced.I spent 2 hours removing all my decals, prefer that look