Can someone tell me if my BX1880 front 2 leaver is a SSQA. Im trying to find a cheep manual angle snow blade. Some Kubota dealers are saying yes and some are saying no. Any help would be great.
kubota bx ssqa question
- Thread starter Typhoonfd
- Start date
I just bought a BX1880 and was told that if you bought the QA bucket option its standard SSQA and can take any SSQA attachments (provided it can handle the weight etc if designed for skid steers)
Thanks.
Most call it Kubota's Quick Attach.
There are a lot of attachments that are made to fit it and will say so. If it doesn't specifically say so, I would be very worried.
Most call it Kubota's Quick Attach.
There are a lot of attachments that are made to fit it and will say so. If it doesn't specifically say so, I would be very worried.
Now to find something small less then 60in with manual angle or possibly find a polly cut edge for the 48in bucket. The only issue with the cut edge option is sidewalks.
Im in New Jersey so we only get a few good snow falls in a season.
Im in New Jersey so we only get a few good snow falls in a season.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Mickeyd,
The Kubota Quick Attach was the Old quick attach versions.
The BX model consisted of one hook in the middle and 2 pins on the sides.
The B's got left out for the most part.
The L's had one that was 2 hooks and 2 pins.
And yes They only worked on Kubota equipment.
The New BX's have gone to the standard Universal SSQA.
All new SSQA's are the same size.
Bobtach made by Melroe / Bobcat were the starters of this attachment setup back in the 80's, and just about everyone in the US has now adopted it as a standard.
I think John Deere is the only major manufacture that is dragging their feet on the change.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Typhoonfd,
Your options are limited, here is one:
https://www.ebay.com/itm/NEW-60-SNO...m=362383282389&_trksid=p2047675.c100005.m1851
Your options are limited, here is one:
https://www.ebay.com/itm/NEW-60-SNO...m=362383282389&_trksid=p2047675.c100005.m1851
Thanks, i did see that one!
I was also looking at https://ratchetrake.com/
but 350.00 is a good chunk of change. i may buy just buy the replacement edge, then counter sink the holes and put it in place of my metal cut edge. but i would rather have a blade then the bucket.