Kubota BX 25 Wheel spacers, Would either of these work? Bore size confusion.

[Joe.G]

Hi, I am have been doing a lot of research and it appears people use both of these, I see one is 70.5 MM Bore and one is 71.5 MM Bore. It is not 100 % clear to me which is for the BX 25 as I see a lot posted about the BX 23. I am not sure if they use different sizes.

Also Should I go with 1.5 or 2 inch? I do not use the mower. Just the loader and Backhoe.

Thank you

https://www.amazon.com/gp/product/B01BD1M02U/ref=ox_sc_act_title_1?smid=A23ID4AZTDBV78&psc=1

https://www.amazon.com/gp/product/B01LY0K8VU/ref=ox_sc_act_title_2?smid=A23ID4AZTDBV78&psc=1

 

[yorkies77]

I have 1 1/2 inch ones on my BX23S. I paid a lot more for them from the dealer. Never had a problem and I feel a lot safe when I'm working on the slopes in the pasture.

 

[GreensvilleJay]

You could remove a rear wheel and measure the hole on the rim......

 

[Joe.G]

I ended up getting the 2 inch spacers, they fit on the tractor fine, Will need a thin wall socket to get the factory bolts tightened . I have not mounted the rims yet as I am doing some maintenance.

 

[Joe.G]

So I got the 2 inch installed and I tried them out, I would like The inside/Center hub of the rim fit a little tighter on the center of the spacer, I did not use this tractor with out them as I just got this tractor and I am just going though it but I tried it with these and it still is a bit unstable compared to my other tractors. I would say this is a must have if you are using these for anything other then mowing.

 

[DustyRusty]

What were your other tractors? None of the inexpensive spacers are hole-centric, so either break out the big bucks for the custom-made spacers or make do with the car spacers. Both will work just as well. If you want more stability, then add 3" spacers, but that is the max. The next step after that is dual rear wheels. https://www.orangetractortalks.com/forums/threads/dual-rear-wheels-on-a-bx.43099/

BX Whatyacallit

www.tractorbynet.com

 

[Joe.G]

We have quite a few John Deere tractors around the farm, the BX25 is something I picked up on trade and figured it would be good for around the house, where I don't want to use something larger and make a mess.