My loader is leaking at the plate that has two hex bolts.its where the the handle pushes and raises the valve.my guess it has o rings.what all seals this from leaking and what's inside there.
Kubota 480 loader leaking at valve?
- Thread starter garrettohio
- Start date
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
Your picture is out of focus so hard to see what ypu are talkingvabout. Here is t G e psrts diagram for your valve. Can you circle the area that is leaking?
Dan
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
There is a wiper and oring under the plate.
Kubota Tractor LA480 B00501 Control Valve [Component Parts] ## [Standard Valve Type L2075]
Shop online for OEM B00501 Control Valve [Component Parts] ## [Standard Valve Type L2075] parts that fit your Kubota Tractor LA480, search all our OEM Parts or call at 888-458-2682
shop.kubotausa.com
Would this cause the hydraulic fluid to pour out at a pretty steady stream.leaked a bunch out.There is a wiper and oring under the plate.
Kubota Tractor LA480 B00501 Control Valve [Component Parts] ## [Standard Valve Type L2075]
Shop online for OEM B00501 Control Valve [Component Parts] ## [Standard Valve Type L2075] parts that fit your Kubota Tractor LA480, search all our OEM Parts or call at 888-458-2682
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
The oring seals the spool to housing clearance where the spool passes through the tank core. If its badly damaged it could leak pretty heavy. Even more so if you have something else wrong and you are pressurizing the tank core.....
Dan
Replaced the two o rings.the bottom one was pretty flat.so far no leaks.on the plate that holds stuff down.are they sopose to be flat? Mine isn't it's kinda bent.
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
I have zero actual experience with that valve but I would think it is supposed to be flat. If it's bent I would be asking myself how and why...
Dan