Anyone using the Kubota 4-Point Quick Connect Front Hitch with the 60" blade and if how do you like it? Any pros and cons? Thank in advance.
Kubota 4-Point Quick Connect Front Hitch
- Thread starter edritchey
- Start date
I have both the 60" p/a blade and the 54" commercial blower. Into my 4th Ontario winter and loving the whole system. 100% trouble-free to date and a breeze to get attachments on and off.
It works fine for me, and what isn't to like when it is so easy to install the blade on the tractor.
ve9aa
Well-known member
Equipment
TG1860, BX2380 -backblade, bx2830 snowblower, fel, weight box,pallet forks,etc
Just the blower. I have a rear blade. Works well.
Shame there aren't more attachments for it, like maybe mini crane or grapple or even mini pallet forks or something. Tons of strength out there. No problem to lift the front end off the ground
Shame there aren't more attachments for it, like maybe mini crane or grapple or even mini pallet forks or something. Tons of strength out there. No problem to lift the front end off the ground
I have all the above. 
Not a lot of experience with the blade as I just bought it, but can tell you its a nice set up. Hydraulics work well with the 4 pt hitch. The whole system itself is pretty ingenious, quick on and off and back to bucket it you want.
The 60 inch blade is well made, stout, smaller than any truck blade, but bigger than any ATV blade.
My blower will throw slush really well, but I figured I'd like to also have the plow as an option.
Not a lot of experience with the blade as I just bought it, but can tell you its a nice set up. Hydraulics work well with the 4 pt hitch. The whole system itself is pretty ingenious, quick on and off and back to bucket it you want.
The 60 inch blade is well made, stout, smaller than any truck blade, but bigger than any ATV blade.
My blower will throw slush really well, but I figured I'd like to also have the plow as an option.
Wow thanks for all the info I have a 3pt snowblower onmy B2601 but was thinking about getting one for on the front.
I'll have to remove the loader but it comes off really easy so no problem there.
The dealer said they don't have any blowers in stock just blades so maybe next year.
I'll have to remove the loader but it comes off really easy so no problem there.
The dealer said they don't have any blowers in stock just blades so maybe next year.
Last edited:
Mrlunchbox
Active member
Lifetime Member
Equipment
2023 BX2380 loader/mower. Land Pride snow pusher, Kapteyn pallet forks
The mirror on the left is a Golf Cart mirror which I got on Amazon. I made the mounting bracket myself. The mirror on the right side is a tractor which I picked up at Princess Auto here in Ontario.Not to hijack the thread, but what is that mirror you got there!!??
Last edited:
The soft cab is made by Berco Equipment and they are from Quebec. Great little cab for less than a $1000. Teamed it up with a 13,400 BTU cab heater from princess auto. Makes plowing or snow blowing a pleasure.
leveraddict
Well-known member
Equipment
2017 BX23S 60" LP BoxBlade 54" mower 60" BackBlade EA 12" 1 bottom plow & Forks
Not much info about the cab on their site??? Are there doors? Are they hinged? Zippers?
Heavy duty very pliable clear plastic. Zippered door on each side. Note this is not weather tight like a hard cab..........but then it's not 5 or 9 thousand dollars either.
I also installed a 14,000 btu cab heater and it is very comfortable inside when blowing or plowing. Nice part about it is about a half hours work in the spring gives me my open station tractor back, which I prefer for summer use.
I just purchased the 4 point system for my L6060. I have the blower, blade and mower. I like the system but am having issues when i try to raise the equipment from the float position. It does not want to move and have to move the joystick around to get it to raise up.
Is anyone else having this issue?
Is anyone else having this issue?