kubotafreak
Well-known member
Equipment
GRAND l6060, L3560, B6100, gr2100, tg 1860, g1800, g1900, g2160
On the GL models, the PB line starts from the loader valve which hard pipes up under the seat in front of the rock shaft. This is where the factory kit breaks the connection tube with two 90* adapters.(orange line in the pic) For my setup the pb of the loader becomes the feed for the third function. The pb of the third functions routes back up to the backhoe feed. Then this completes the circuit by going back to the other open, which is the inlet for the rear three point lift. Some kits have an additional gray line which is tank port.