King Kutter scoop?

M

mike paulson

Member
Jan 11, 2012
228
24
18
ulster, NY
Hey guys I have a the larger sized King Kutter dirt scoop. Im in the process of buying a b2620 and was wondering if this will fit my new tractor? If someone with a B2620 or B2920 could give me max spacing between 3pt lift arms that would be great. I checked everywhere for specs and couldn't find anything on the B2620 3pt spacing....
 
Last edited:
R

Russell King

Well-known member
Lifetime Member

Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Jun 17, 2012
5,356
1,411
113
Austin, Texas
tsafa said:
Is this what you were talking about? How is this implement used?
Click to expand...
These scoops are also called the "poor man's loader".

They are pulled behind to take up some dirt, lifted, then dumped in another site. Some can be turned backwards so you can back into the area to scoop from.

In answer to the will this fit my tractor question - what category 3 point is the implement and what category 3 point is the tractor? If they are the same then they will fit.
 
M

mike paulson

Member
Jan 11, 2012
228
24
18
ulster, NY
Russell King said:
These scoops are also called the "poor man's loader".

They are pulled behind to take up some dirt, lifted, then dumped in another site. Some can be turned backwards so you can back into the area to scoop from.

In answer to the will this fit my tractor question - what category 3 point is the implement and what category 3 point is the tractor? If they are the same then they will fit.
Click to expand...
they make a great ballast box too, I put spackle buckets filled with concrete in them about 150 lbs a piece, also mostly used to back into piles.
 
You must log in or register to reply here.

Top Bottom