Is there anyway to stop a leather belt from slipping on an old South Bend lathe

Sidekick

Sidekick

Well-known member

Equipment
Kioti CK2620SE cab, RTV-X, BX2360, Z726XKW-3-60
Jul 29, 2023
553
496
63
N.Y,
Yesterday I had to turn some brass bushings an my 1950s South Bend lathe and as soon as the cutter hit the brass the spindle stopped turning. The top leather belt on the step drive was slipping on the drive pulley. The belt is probably 50 years old but still in good condition. Last couple uses it definitely would slow with heavy cuts. Just wondering if there's a dressing for old leather belts, cleaning / softening solution, or a good place to buy replacement belting and end clips. Possibly could there be man made belting with a little grip available. Thanks for any replies.
 
L

lynnmor

Well-known member

Equipment
B2601-1
May 3, 2021
1,444
1,159
113
Red Lion
I remember using belt dressing similar to what is posted above. Other than that, a new belt may be in order, search for them online and you will find numerous options. Sanding the pulleys to a dull finish will help as well.
 
  • Like
Reactions: 1 user
Sidekick

Sidekick

Well-known member

Equipment
Kioti CK2620SE cab, RTV-X, BX2360, Z726XKW-3-60
Jul 29, 2023
553
496
63
N.Y,
Well I tried cleaning it with alcohol, spraying with 3m adhesive on the inside, and putting a little more tension on it. Tore the staples and now definitely need a new belt. Guess the belts only last 50 years 😲. Was able to finish my bushing slowly in back gear though.
1000002512.jpg
1000002511.jpg
 
D

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
13,808
5,535
113
40 miles south of Kansas City
Sidekick

Sidekick

Well-known member

Equipment
Kioti CK2620SE cab, RTV-X, BX2360, Z726XKW-3-60
Jul 29, 2023
553
496
63
N.Y,
Sidekick

Sidekick

Well-known member

Equipment
Kioti CK2620SE cab, RTV-X, BX2360, Z726XKW-3-60
Jul 29, 2023
553
496
63
N.Y,
D2Cat said:
Here's what you need. Guaranteed to fit.

Click to expand...
Those belts are made to drive on the V walls and work well for that. They don't drive well on the flat narrow stepped inside. Would be nice if they made one for flat crowned drives.
 
D

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
13,808
5,535
113
40 miles south of Kansas City
Actually, no more laces then that belt has you could easily make a new belt with those laces. Ever seen a baler belt spliced together? Same process, just easier because there is not much holding the ends together.
 
Last edited:
  • Like
Reactions: 1 user
V

Vlach7

Well-known member

Equipment
L47 305DT JD500C
Dec 16, 2021
345
251
63
Frazier Park Ca
I remember a cream we would put on our leather firefighter boots to waterproof them and it would create a surface grip that would've been perfect for your belt. Not sure which brand it was, would have worked if you want to keep it original with the leather belt.
 
  • Like
Reactions: 1 user
P

PoTreeBoy

Well-known member
Lifetime Member

Equipment
L35 Ford 3930
Mar 24, 2020
2,802
1,518
113
WestTn/NoMs
Since the pulley runs between bearings, I assume the belt has to be field joined. If you end up with a new belt, you may be able to field (cold) vulcanize it. It would run smoother than a laced belt.
 
  • Like
Reactions: 1 user
Oleracer

Oleracer

Active member

Equipment
B2150 Kubota LA 350 750 Woods S250 Bobcat 300x deere
Jul 18, 2024
181
219
43
CT
I finally dumped the leather belt on my south bend. Run a serpentine belt upside down super glued together and never looked back. Nobody is wiser and never a problem again. Look it up on utube. Many have done it. Dont bother with amazon or ebay leather belts. All garbage and dont last.( went thru 4)
 
  • Like
Reactions: 1 user
Sidekick

Sidekick

Well-known member

Equipment
Kioti CK2620SE cab, RTV-X, BX2360, Z726XKW-3-60
Jul 29, 2023
553
496
63
N.Y,
Oleracer said:
I finally dumped the leather belt on my south bend. Run a serpentine belt upside down super glued together and never looked back. Nobody is wiser and never a problem again. Look it up on utube. Many have done it. Dont bother with amazon or ebay leather belts. All garbage and dont last.( went thru 4)
Click to expand...
Did you go with a narrower belt and use a special super glue that stats soft so it doesn't crack while flexing around the pulleys? I have some 1 inch wide 10 ft long industrial t10 timing belts that I may try.
 
S

Steamer Pete

Member

Equipment
LX2610
Mar 29, 2021
47
41
18
Holland, MI
Sidekick said:
Yesterday I had to turn some brass bushings an my 1950s South Bend lathe and as soon as the cutter hit the brass the spindle stopped turning. The top leather belt on the step drive was slipping on the drive pulley. The belt is probably 50 years old but still in good condition. Last couple uses it definitely would slow with heavy cuts. Just wondering if there's a dressing for old leather belts, cleaning / softening solution, or a good place to buy replacement belting and end clips. Possibly could there be man made belting with a little grip available. Thanks for any replies.
Click to expand...
Look up Power Transmission Belts in McMaster Carr. Pick the correct width as your existing belt. Order a few more inches than the current length of your belt. Look up the antique tractor guys in your area. Most will have access to a Clipper lacer. Do NOT put a leather belt back on. They are sensative to weather changes, stretch over time, and drying out. There are modern materials that work far better.
 
  • Like
Reactions: 1 users
Missouribound

Missouribound

Active member

Equipment
B2320, FEL, BOX BLADE, FINISH MOWER, QUICK HITCH
Jun 17, 2014
652
42
28
Missouri
Glad you came up with a solution.
Here's another one....but I doubt it will be less costly that what you did.

Leather Drive Belts | Hudson Belting

One of the ONLY remaining Leather Drive Belt manufacturing company. Our belts are sold throughout US and are unmatched in quality and price.
www.hudsonbelting.com www.hudsonbelting.com
 
  • Like
Reactions: 1 user
You must log in or register to reply here.

Top Bottom