Inactive Glow Plugs

S

slingshot ammo

New member

Equipment
2003 MX5000D Utility special
Jul 20, 2021
5
0
1
Covington La.
Good morning thanks for letting me join .
A friend has a recently purchased 2003 Kubota MX5000D and when you turn the key left to warm the glo plugs it engages the starter . The starter engages normally when the key is turned to the right . The previous owner changed the ignition switch to fix this problem but it didn't help . Any ideas on fixing this problem would be appreciated . Thanks!
 
R

Russell King

Well-known member
Lifetime Member

Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Jun 17, 2012
5,368
1,416
113
Austin, Texas
Just so you know the glow plugs are (probably) powered in both glow plug and the start position of the key.
 
Dave_eng

Dave_eng

Well-known member
Lifetime Member

Equipment
M7040, Nuffield 465
Oct 6, 2012
5,235
1,018
113
Williamstown Ontario Canada
Does the key switch presently in the tractor have a pig tail with connector like the one below?

forum MX5000DT switch .jpg


If the switch has the pigtail, the likelihood that the switch is wired wrong is next to zero.

The start relay #3 is powered all the time but is activated by the ground side of its coil circuit which passes through safety switches such as the pto switch and the shuttle shift switch where the ground path is broken if the pto is engaged or the shuttle shift is in forward or reverse.

As has been often reported on this forum, wiring damaged by rodents is a common problem. In the case of this tractor, with the starting relay being activated on the ground side, a bare wire touching ground would engage the relay.

Dave
 

Attachments

eserv

eserv

Well-known member

Equipment
BX24, A1000 Kubota Generator
May 27, 2009
2,140
139
63
Hardisty, Alberta
Dave_eng said:
Does the key switch presently in the tractor have a pig tail with connector like the one below?

View attachment 63487

If the switch has the pigtail, the likelihood that the switch is wired wrong is next to zero.

The start relay #3 is powered all the time but is activated by the ground side of its coil circuit which passes through safety switches such as the pto switch and the shuttle shift switch where the ground path is broken if the pto is engaged or the shuttle shift is in forward or reverse.

As has been often reported on this forum, wiring damaged by rodents is a common problem. In the case of this tractor, with the starting relay being activated on the ground side, a bare wire touching ground would engage the relay.

Dave
Click to expand...
The coil side of the starter relay is activated by the main switch only in the start position. It looks to me like the ST and the G wires are switched somewhere or have gotten connected together .
 
Last edited:
S

slingshot ammo

New member

Equipment
2003 MX5000D Utility special
Jul 20, 2021
5
0
1
Covington La.
Dave_eng said:
Does the key switch presently in the tractor have a pig tail with connector like the one below?

View attachment 63487

If the switch has the pigtail, the likelihood that the switch is wired wrong is next to zero.

The start relay #3 is powered all the time but is activated by the ground side of its coil circuit which passes through safety switches such as the pto switch and the shuttle shift switch where the ground path is broken if the pto is engaged or the shuttle shift is in forward or reverse.

As has been often reported on this forum, wiring damaged by rodents is a common problem. In the case of this tractor, with the starting relay being activated on the ground side, a bare wire touching ground would engage the relay.

Dave
Click to expand...
Thanks so much for the info , when i get to the tractor and check it out i will let you know what the results are .
 
You must log in or register to reply here.

Top Bottom