I need Hydraulic lift arms for L245DT

[davisd]

I hope that this is ok but I need to locate two new lift arms for my L245DT 3-pt. I bought this tractor and these need to be replaced. (These are the rods that connect the hydraulic lift arm to the draft arm. One is static and the other adjustable). I prefer used or aftermarket. Kubota dealer quoted me $700 for the two of these. I am unable to pay that much.

Any ideas aside from making them from scratch?

Dean

 

[North Idaho Wolfman]

There are listings on EBay for some arms.
West Kentucky Tractor Parts would be another place to get used parts
http://wkytpstore.com/

 

[D2Cat]

I needed one for an L1500 and had this on my Ebay watch list. It's now sold, but it give you a description of what to search for. Might also check this sellers store because he may have more. It gives you an idea of price. The one on the left side should be less cost since it is not adjustable. Good luck.

Sorry, here's the link: http://www.ebay.com/itm/360958411456?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT

 

[cerlawson]

Do you have a friend with a welder? They are rather simple and any reasonable mechanic can make them.

Tractor Supply WEB page has the adjustable one for $40.
Part no. 026774199