Anyone have any tips and tricks for testing the relief valve on the kubota tractor with open LCS. Thanks for your time.
Hydraulic testing
- Thread starter OlFerguson
- Start date
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
What specific model? In general you connect a pressure gsuge to the neutral circuit and then deadhead the circuit. Where and how to connect varies by model.
Dan
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
Those machines are a black box for me. I am not even sure they are open center. Do you have a loader on it?
Dan
yeah I have a m46 loader on it made by Alo (quicke) . I know with Kubota they seem to make different machines for different countries but im in Canada . Looking at the diagrams its an open centre, which I’m going to assume changes the way you test things.
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
A simple way to check relief pressure is to use the loader. Plug a pressure gauge into one of the cylinder ports on the loader valve and operate the loader valve to send oil that port and hold it there to get a pressure reading. Do not operate any other ports at the same time.
Dan