I have hyd fluid in my oil kubota b20 i have the pump off and i have inspected oil seal and it appears there is nothing wrong with oil seal is there any other points of entry for hyd fluid to git in motor oil
hydraulic fluid in oil
- Thread starter busybeazz
- Start date
Of course you know that you have two hydraulic pumps. Which pump have you removed??
the one on the passinger side .conected to cam .
The one up frunt is conected by drive shaft so it could not b that one
The one up frunt is conected by drive shaft so it could not b that one
I had the same problem last year - fluid leaking past the seal into the fuel injector pump and on into the crankcase. The seal looked ok at the time. For 2200 psi I don't think a visual inspection would suffice.
My B7200 did the same thing last year and I replaced the seal and it did nothing. I ended up replacing the pump. Some where about $500.00. But it fixed the problem.
Dusty
DustyI suspect that I am having the same problem on my b20. how did you know that it was hydraulic fluid in the oil?
In my case I was getting very blue fluid coming out the oil overflow when I had put in very brown oil. Plus the hydraulic reservoir was frequently empty. Same as above, seal looked ok but had to replace entire pump. This on the d750 engine.