HST pedal problems

[olekid]

Greetings, have a B7510 HST, the hst pedal sometimes doe not return to neutral and I have to reach down and move it a little in order for it to start, any suggestions to fix it?

 

[Palmettokat]

Look to be sure no trash such as limb or twig is interfering with it. Under the floor board. Lube all pivot points.

 

[lugbolt]

yes. do as Palmettokat suggested.

If you do that and it still sticks remove the dampener from the linkage and see if it still sticks. if no, replace the dampener. If it does still stick, you're probably going to have to replace the neutral roller, and that is not a particularly "fun" job.

 

[Bpaw]

yes. do as Palmettokat suggested.

If you do that and it still sticks remove the dampener from the linkage and see if it still sticks. if no, replace the dampener. If it does still stick, you're probably going to have to replace the neutral roller, and that is not a particularly "fun" job.

My neutral roller is shot and I just try to keep grease on it and it helps until I can fix the roller but looks like a heck of a job.