How to remove dipper bushine on B75?

[john11139]

I am trying to replace the dipper stick end bushing on my backhoe. I made a special bushing driver to knock it out but it wont budge. Did they install these with locktite? Will it have to be cut our with a torch. Thought I would ask first. Maybe some one has done it before.

 

[redmaher]

I am trying to replace the dipper stick end bushing on my backhoe. I made a special bushing driver to knock it out but it wont budge. Did they install these with locktite? Will it have to be cut our with a torch. Thought I would ask first. Maybe some one has done it before.

Do you have any pictures if the bushing?

Sent from my LG-H872 using Tapatalk

 

[whitetiger]

By far the simplest and quickest way is with a torch. Carefully slit the bushing all most all the way through and drive it out with a large hammer and punch.

 

[john11139]

By far the simplest and quickest way is with a torch. Carefully slit the bushing all most all the way through and drive it out with a large hammer and punch.

That's what I figured. Thanks